The ICC2-ATSC 4S HDTV Tuner is an integrated HDTV Tuner/Controller that networks HD monitors and projectors in a Display Express TV control system. Housed in a new, smaller enclosure, the unit fits into a standard 1RU rack space for easier mounting on a TV or in a 19” rack.

As a universal TV tuner, the ICC2-ATSC 4S can receive ATSC, NTSC, and clear QAM cable channels, able to decode MPEG-2 and MPEG-4 video. The tuner displays broadcasts through simultaneous HDMI, RGB/Component, and NTSC composite video ports. Full-time audio is available from digital AC-3 HDMI, optical and coax SPDIF ports, as well as variable-level analog stereo audio outputs.

• Through-the-RF Integration - controls displays through iC-Net technology, communicating via existing CATV coax wiring for 1-way or 2-way control
• System Solution - communicates with Display Express software, and custom control systems
• Display Control - employs RS-232 control port for integrated display control, integrator can switch to different make/model types from an onboard library
• Provides local control via IR remote (optional) or wired IR from control system or remote IR sensor, or 1-way RS-232 commands
• Tunes ATSC off-air, clear QAM cable, and analog channels
• Always-active HDMI and composite video, as well as stereo, and digital coax and TOSlink optical audio ports
• RGBHV or Component outputs switchable from front-panel settings or RS-232 control
• AC-3, PCM and Variable PCM digital audio formats for SPDIF audio ports and HDMI
• Front-panel and onscreen menus for tuner setup and scanning, new buttons eliminate need for IR remote for setup
• Supports dual Air/Cable tuning with optional RF switch
• Analog and digital closed captioning
• Upscales SD and analog channels up tp 1080p, or follow native channel resolution
• Rack-mountable in 1.5RU, two across
• Field updatable for control and HD processing firmware
• Green Machine - meets ROHS and California energy-saving standards

• Size (WHD): 8.5” [216mm] wide x 1.75” [44mm] height (1.5 RU) x 8.0” [203mm] deep
• Weight: 1.94 lbs [890 g]
• Enclosure: Steel with black powder coat paint
• Mounting: 1 RU Rack mounting for one or two units side-by-side optional (RK1, RK2-EZ)
• Certification: ROHS compliant, meets California codes

• Display: Red LED Channel Display, dot separated major and minor channel numbers, dot at end indicates Off-Air tuning
• IR: IR sensor
• Control: Power , Menu, and Select buttons, navigation using Up and Down (Channel Up and Down) buttons
• Left and Right (Volume Up and Down) buttons
• LEDs: NET (Green) RS-232 RX (Yellow), RS-232 TX (Red)

• Service: USB port (not presently active)
• RF In: 1 'F', female, 75 ohm impedance, recieves RF feed
• RF Out: 1 'F', female, 75 ohm impedance, outputs RF to Air/Cable
• Air/Cable: 1 'F', female, 75 ohm impedance, recieves RF from RF Out
• AV Output: Simultaneous HDMI, RGB/Component, and video out - switchable RGB/Component.
  • Simultaneous HDMI (PCM/AC-3), digital coax and optical (AC-3 or PCM), stereo audio.
• Video Out: RCA composite video output, 1V p-p at 75 ohm impedance
• Component Out: 3 RCA Y, Pr, Pb outputs (1080p/1080i/720p/480p/480i)
• Digital Audio S/PDIF: Coax and TOSlink optical output, Dolby 5.1/PCM
• Analog Audio Out: Stereo RCA audio, Mono, Stereo, or SAP, variable level
• RGBHV Out: RGBHV DB-15 female (1080p/1080i/720p/480p/480i)
• HDMI: HDMI receptacle, Type A, HD video and digital audio (in PCM mode), version 1.2 (1080p/1080i/720p/480p), HDCP
• RS-232 Control: DB-9 male, RS-232 data link to control display or projector, 1200-115,000 baud
• A/C (Air/Cable): 3.5 mm closure output to operate the optional RF-AB RF Switch
• IR In: 3.5 mm stereo input for external IR sensor or wired IR (no carrier, discrete codes available)
• Power In: 2.1mm coaxial jack (inside center conductor positive)
  • 1 A maximum, 11.5 to 15 VDC, 12 VDC typical

• Frequency Range: NTSC, ATSC (8-VSB) and Clear QAM (cable) television 55.25 to 801.25 MHz
• DTV Resolution: ATSC/QAM 1080i/720p/480p/480i
• Tuning: Off-air 2-69 (NTSC and 8-VSB) and CATV 2-135 (Analog, 64QAM, 256QAM, 8-VSB)
• Aspect Ratio: 4:3/16:9 (Digital), 4:3, 16:9, Zoom (Analog channels)
• Captioning: DTV and analog, set by program or customized for size, font and display attributes
• Lock: Parental option for channels and/or rating

• On-Screen: Displays on-screen analog and digital captioning on all video ports.
• Captioning Data: HDMI, RGB, and Component ports don’t have the ability to carry captioning data.
• The composite video port will carry Line 21 data, but only when tuned to an analog channel

• 5402-001 - PS12-1.5 Switching power supply, 1.5A 12 VDC, compact enclosure fits into power strips, 2.5" H x 2" W x 1" D
• 5008-025 - RKU, Universal Rack Mount Kit