This is a legacy product
Technical support is available for this product. Availability of repair services should be verified with a technical support agent.
Replaced by:
QMOD-SDI 1.5 HDTV Modulator-IPTV Encoder
Type:
RF Modulators
,
IPTV Encoders
Part Number: 5094-001
Size: 8.500 wide x 1.730 high x 6.000 deep
Weight: 1.500
Distribution:
AV over RF
,
AV over IP
,
Hybrid Systems
Released: May 2015
QMOD-SDI 1.5 Product Manual
QMOD-SDI 1.5 Data Sheet
CR Toolbox 4.4.4
More about RF Modulators
Modulation in its most basic definition is the mixing of two sinusoidal signals. The RF modulator takes an input signal and outputs a modulated signal to be transmitted as a video channel to any number of connected TVs. RF Modulators are used to distribute video in widely diverse installations, including stadiums, arenas, office buildings, college campuses, houses of worship, sports bars, and restaurants
About QMOD-SDI 1.5 HDTV Modulator-IPTV Encoder
The QMOD-SDI1.5 continues the QMOD track record for quality and innovation, setting a new benchmark for features and performance. In addition to standard SDI resolutions, the QMOD-SDI can accept 3G SDI and 60/30 Hz feeds from prosumer SDI sources.
Related Equipment & Software
RF Modulators
Software Tools
Accessories
Full Description & Specifications
The dual-channel QMOD-SDI 1.5, with SDI and Component inputs, sets a new standard for sports, motion and digital signage encoding. Dual hardware scalers accept content up to 3G 1080p, shapes signage for edge-to-edge presentation, and compensates for non-broadcast and PAL refresh rates. Able to deliver two HD programs in one channel, the QMOD-SDI 1.5 can also output the content as a Multicast or Unicast IPTV stream. Options include dual-language SAP audio, easy front-panel setup and alternate audio and NTSC video inputs. Web setup, monitoring, and firmware updates are available via USB and Ethernet ports. Two-across mounting offers up to four programs per rack space, with the ability to mix models to handle HDMI, SDI, Component, RGBHV and NTSC video sources.
Distribution: AV over RF , AV over IP , Hybrid Systems
Encoding:
- MPEG-2 Profile:MP@HL for HD, MP@ML for SD
- 1080i, 720p, 480p, and 480i resolution
- Video Encoding bitrate 11, 13, 15, 18 or 25 Mbps
- AC-3 (Pass-through or stereo) or MPEG-1, Layer 2 audio
- MTS Dual-language capability
- Full scaling for video up- and down-conversion with optional upgrade key
- Dual-channel operation with optional upgrade key
Modulation:
- Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1)
- MER 38 dB typical
Front Panel:
- Select and directional buttons for menu setup
- Menu LCD, Blue with 2 lines of 20 white characters each
Standards:
- FCC Class B, ROHS, meets California standards
Back Panel:
- Power: 2.1mm coaxial jack (inside center conductor positive)
- 1.1A maximum, 11.5 to 13.5 VDC, 12 VDC typical
- EAS: 3 Pin screw terminal; SW for latching closure, V+ (5-12 VDC), Ground
- Ethernet: RJ-45 GigE Ethernet connector for IP control, IPTV and internal Web page
- SDI Input: BNC Female
- SD-SDI @ 270Mb/s, HD-SDI @ 1.485Gb/s, 3G SDI @ 2.970Gb/s
- Coax cable auto-equalizer for SD up to 460m, HD up to 230m (RG6)
- Resolutions 1080p at 59.94Hz, 1080i/720p at 59.94/60Hz, or SD 480i at 29.97Hz
- Video Format YCbCr 4:2:2
- Accepts SDI embedded Stereo/AC-3 48KHz audio
- Widescreen option for 480i
- Analog Video: Component: RCA Y, Pb, Pr (1080i/720p/480p/480i), 59.94/60/29.97/30 Hz
- S-Video: Y(Composite), C (Blue Pb) 480i, 29.97 Hz
- Composite Video: RCA female (480i), 29.97 Hz, supplies line 21 Captioning
- Audio Inputs: Coax and optical SPDIF digital audio inputs
- Analog L and R: 2 stereo RCA jacks
- Inputs assignable to video inputs
- RF: ‘F’, female, 75 ohm impedance
- Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
- 6 MHz bandwidth fits any open channel without interference to adjacent channels
- 1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
- 29 dB typical output power, attenuated in 5 steps, approx 4 dB
PS12-2.0 Power Supply
12VDC 2A Power Supply